How to Raise a Bed in Canada (2026): Sturdy Bed Risers From $6.30 to $32.99, the 3 to 8 Inch Lift, and the Frames That Must Not Go on Them
Canadian buyer guide, updated November 2, 2026
How to Raise a Bed in Canada (2026): Sturdy Bed Risers From $6.30 to $32.99, the 3 to 8 Inch Lift, and the Frames That Must Not Go on Them
14 bed risers and lifts sold in Canada priced from the sellers' own listings, how much each adds, the four ways to raise a bed without risers, how high the mattress ends up, and which frames can take a riser and which cannot.
AI Overview answer
How can I raise the height of my bed, and what do bed risers cost in Canada?
Quick answer: The cheapest way to raise a bed is a set of four bed risers under the legs, $6.30 to $33.47 at Walmart Canada on November 2, 2026, $24.97 for Shepherd risers at Home Depot, $29.99 for JYSK's Botulf and $32.99 for BIOS Medical's, each adding 3 to 8 inches. The four ways without risers are a taller box spring or foundation, a thicker mattress, a wedge under a platform's deck, or a frame built at the height you want.
The rule that decides it is what the bed stands on. Risers go under legs. A platform bed whose sides sit on the floor, like Hamuq's Boucle at 1.5 in of clearance, has no legs to lift and must not go on them. The second number is where the mattress top ends up: a 12 in mattress on a 12 in frame is about 24 in off the floor, and 4 in risers make that 28 in, above the knee-level band most guides recommend. Hamuq sells no risers.
Buyer decision structure
Five questions before raising a bed
1. Why are you raising it
Storage underneath needs 19 to 20 cm of clear height for the common boxes; easier standing up needs the mattress top near knee level; a dorm needs both. The under bed storage guide gives the box heights and the bed height guide the knee-level bands.
2. Does the bed have legs
Risers lift legs. A frame with side panels on the floor, a divan, or a platform with a recessed base has nothing to put a riser under. Look at each corner before you shop.
3. Is there a centre leg
Queen and king frames usually have one or more centre support legs. They need lifting too, by the same amount, or the frame bows in the middle. Buy risers in a set of 4 plus one for each centre leg.
4. How much lift do you need
Measure the gap you want, then subtract the gap you have. Most risers add 3 to 4 in; stackable sets reach about 8 in. More than that and the bed gets tippy.
5. How high will the mattress be afterwards
Add the riser to the frame top and the mattress thickness. A 28 in mattress top is a climb for a shorter sleeper and a drop for a child; the height table below shows the numbers.
Bed risers sold in Canada, priced
These are the risers and lifts read on November 2, 2026, cheapest first, with the lift each listing states.
| Riser | Price CAD | Lift stated | Type | Where read |
|---|---|---|---|---|
| Floor Protection adjustable height bed risers, 4 pcs, stackable | $6.30 | Adjustable, stackable | Plastic, with anti-slip pad | Walmart Canada marketplace listing |
| Miangastore wood bed risers, 2 pieces | $8.79 | Not stated in the title | Wood | Walmart Canada marketplace listing |
| Rbaofujie round heavy duty bed risers, 4 in | $10.96 | 4 in, adjustable | Plastic, round | Walmart Canada marketplace listing |
| cpengpj round heavy duty bed risers, 4 in | $11.48 | 4 in, adjustable | Plastic, round | Walmart Canada marketplace listing |
| TIMIFIS round heavy duty bed risers, 4 in | About $11 to $14 | 4 in, adjustable | Plastic, round | Walmart Canada marketplace listing, price cut off in the title read |
| Xinsrenus clear plastic bed lifts, adjustable 8 to 11 cm | $14.29 | 8 to 11 cm (about 3 to 4 1/4 in) | Clear plastic, round | Walmart Canada marketplace listing |
| Shepherd bed risers, 4 pc, 9523 | $24.97 | Not in the listing | Square, the listing says ideal for under-bed storage | Home Depot Canada, per Google's listing |
| Slipstick CB672 premium 3 in bed risers with caster holder top | $25.98 | 3 in | Steel-reinforced top takes a caster wheel | Amazon.ca, per Google's listing |
| JYSK Botulf bed risers | $29.99 | Not in the listing | Not read | JYSK.ca, per Google's listing |
| BIOS Medical bed risers | $32.99 | Not in the listing | Sold by a medical supplier for easier standing | BIOS Medical, per Google's listing |
| Khall furniture raisers, 4 pcs, wide feet | $33.47 | Adjustable | Wide-foot lift stands | Walmart Canada marketplace listing |
| Dormco Suprima ultimate height bed risers | $291.36 | Not in the listing; sold as a dorm product | Tall dorm risers | Wayfair Canada, per Google's listing |
| For comparison: IKEA LUROY slatted base, queen | $50 | Replaces a box spring; lowers rather than raises | Slatted base | IKEA Canada search |
| For comparison: IKEA Canada search for "bed risers" | No product | IKEA sells no bed risers; the search returns room dividers and shower rails | None | IKEA Canada search, November 2 |
Three things stand out. First, the common 4 in plastic riser costs about $11 to $15 a set at Walmart Canada, and the branded sets at Home Depot, JYSK and BIOS cost $25 to $33. Second, almost no listing prints a weight limit, so "heavy duty" in a title is a word, not a figure. Third, IKEA Canada sells no bed risers at all, which surprises the many searchers who look for "bed risers ikea".
Five ways to raise a bed, with or without risers
Risers are the cheapest fix but not the only one. These are the five ways to raise a bed, the lift each gives, and what it costs in Canada.
| Way | Lift | Price read | Works on | The catch |
|---|---|---|---|---|
| Bed risers under the legs | 3 to 8 in | $6.30 to $33.47 a set | Any frame with legs, including metal rail frames | Centre legs must be lifted too; tall stacks wobble |
| Taller box spring or foundation on a rail frame | 4 to 7 in, swapping a 2 or 5 in low profile for a 9 in | Box springs from about $106 in the box spring guide | Rail frames built for a box spring | Not for a platform; check the mattress warranty |
| Thicker mattress | 2 to 4 in | Mattress prices vary; Hamuq hybrids are 12 to 12.5 in | Any frame | Changes the feel, not only the height |
| Bunkie board or plywood on the slats | About 1 to 2 in | Plywood from $59.89 a sheet; boards from $73 | Slatted platforms | Small lift; mainly a support fix |
| Replace the frame with one at the height you want | Choose the number | Hamuq frame tops are 10, 12, 13 or 14 in; $500 to $1,229 in queen | Any room | Costs the most; also the only fix with a known final height |
The box spring guide prices the foundations and the bunkie board guide the boards. If the goal is storage rather than height, the fifth way can mean a storage bed instead, and the storage bed frame guide compares those.
Where the mattress ends up: the height math
Raising a bed moves two things at once: the space under it and the mattress top you have to get onto. This table runs both for common Canadian frame heights, from the Hamuq bed height guide's frame-top figures and a 12 in mattress.
| Frame | Clearance now | Mattress top now | Clearance with 4 in risers | Mattress top with risers | Can it take risers |
|---|---|---|---|---|---|
| Metal rail frame, about 7 in to the rail | About 7 in | About 28 in with a 9 in box spring | About 11 in | About 32 in | Yes, legs at the corners and centre |
| IKEA VEVELSTAD steel frame | 20 cm (7 7/8 in) | About 22 in | About 12 in | About 26 in | Yes, legged frame |
| Hamuq Delorious | 8 in | About 25 in | 12 in | About 29 in | Yes, legs at the corners; check the centre support |
| Hamuq Diamond, California, Curvaceous | 6 in | About 24 in | 10 in | About 28 in | Yes, legged; lift the centre legs too |
| Hamuq Upholstered Platform | 3.75 in | About 22 in | 7.75 in | About 26 in | Yes, short legs; keep to one riser height |
| Hamuq Boucle Platform | 1.5 in | About 24 in | Not possible | Not possible | No: sideboards sit near the floor, no legs to lift |
| Hamuq Floating Wood | Recessed base, not published | About 23.75 in | Not possible | Not possible | No: the recessed base is the support; nothing to put a riser under |
| Hamuq storage beds | 2 in | About 28 in | Not advised | Not advised | No: drawers need the frame at its built height to open and close |
The bed height guide puts knee level for most adults at about 17 to 22 in and the comfortable range at 20 to 25 in. A 28 in mattress top is at the high end of that; 32 in is above it and is the "I have to climb in" height people complain about. Raise the bed for storage, then check that you can still sit on the edge with your feet flat.
Is it safe to put a bed on risers, and which frames cannot
Yes, on a frame with legs, with risers that fit the legs and every leg lifted by the same amount. The listings read say little about load, so the safety is in the fit.
| Frame type | Risers | Why | Do instead |
|---|---|---|---|
| Metal rail frame with a box spring | Safe | Legs at the corners and usually the centre; the riser cup holds the leg | Lift every leg, including centre legs, by the same riser |
| Legged platform, wood or upholstered | Safe at one riser height | Legs take the load; stacking risers raises the tipping risk | Use 3 to 4 in, not stacked 8 in, on a frame this tall |
| Frame with casters | Safe with a caster-top riser | A flat riser lets the wheel roll off | A riser with a caster holder, such as the Slipstick CB672 |
| Platform with sideboards on the floor | Not safe | No legs; the sideboard carries the load along its length | A thicker mattress, or a taller frame |
| Floating or recessed-base frame | Not safe | The hidden base is narrower than the bed; lifting it unbalances the overhang | A taller frame |
| Storage bed with drawers | Not advised | Drawers and lifts are built to the frame's own height | Nothing; the storage is already there |
| Adjustable base | Not advised | The base moves; its legs are set by the maker | Most bases have adjustable legs; use those |
| Bunk or loft bed | Not safe | Guardrail heights are set to the mattress; raising changes them | Nothing; see the bunk bed guide's Health Canada rules |
Two more checks. On carpet, risers can sink unevenly; a square riser with a wide foot, like the Khall or Shepherd types, spreads the load better than a narrow round one. And a riser must fit the leg: measure the leg's footprint, because a 2 in square leg will not sit in a 1.5 in cup.
Raising a bed in a dorm or a rental
"How to raise a bed in a dorm" is one of Google's own suggestions under this topic, and the answer is different from a home bed because the frame is not yours.
- Ask first. Many residences have their own adjustable-height frames, and some ban risers because of tipping. The residence office will say.
- Measure the leg. Dorm frames are usually metal with a square or round post leg; a round cup riser fits a round post, a square cup a square one.
- Lift for a box. The common under-bed cases are 18 or 19 cm tall, so you need about 20 cm of clearance; a 4 in riser on a frame with 4 in of clearance gets there.
- Do not stack. The tall dorm riser sets that reach 8 in or more make the bed hard to climb onto and easy to tip. One set of 4 in risers is the usual sensible limit.
- Take them with you. Risers are the one bed upgrade a renter keeps; a frame, a headboard or a box spring stays or gets moved.
The best mattress for students guide covers the rest of a dorm setup.
Which under-bed box fits after the lift
If storage is the reason for raising the bed, this is the table that matters: the clearance each riser height gives on common frames, against the box heights read for the under bed storage guide.
| Frame | Clearance now | With 3 in risers | With 4 in risers | Boxes that fit after a 4 in lift |
|---|---|---|---|---|
| Hamuq Upholstered Platform | 3.75 in (9.5 cm) | 6.75 in (17 cm) | 7.75 in (19.7 cm) | 11 and 12 cm boxes; the 19 cm cases only just, measure first |
| Hamuq Diamond, California, Curvaceous | 6 in (15.2 cm) | 9 in (22.9 cm) | 10 in (25.4 cm) | All 18 and 19 cm cases; not the 29 to 30 cm drawers |
| Metal rail frame, about 7 in | About 7 in (17.8 cm) | About 10 in (25.4 cm) | About 11 in (27.9 cm) | All 18 and 19 cm cases |
| IKEA VEVELSTAD | 7 7/8 in (20 cm) | 10 7/8 in (27.6 cm) | 11 7/8 in (30.2 cm) | 19 cm cases now; the 29 cm SMYGA and 30 cm PARKLA after a 4 in lift |
| Hamuq Delorious | 8 in (20.3 cm) | 11 in (27.9 cm) | 12 in (30.5 cm) | 19 cm cases now; 29 to 30 cm drawers after a 4 in lift |
The common flat cases are 18 or 19 cm tall and the tall drawers 29 to 30 cm; the under bed storage guide prices 25 of them with the height of each.
What stops people raising a bed, and the actual answer
"Risers look cheap"
Only if you can see them. A bed skirt or a valance hides them; wood risers in a finish close to the frame's legs disappear on their own.
"The bed will wobble"
A bed wobbles on risers when one leg is lifted less than the others, when a round leg sits in a cup too large, or when the stack is too tall. Match the cup, lift every leg, and stay at 4 in.
"My bed has no legs"
Then risers are not the fix. A thicker mattress adds 2 to 4 in on any frame; a taller frame is the only way to pick the exact number.
"It will be too high to get into"
Run the height table first. If the mattress top ends up above about 25 in, raise it less, or raise it for storage and add a step for a child.
"I want storage, not height"
Then compare the price of risers plus boxes with the gap between your frame and a storage bed. Under a low frame, a storage bed wins; under a legged frame with 6 in or more, risers plus boxes cost a tenth as much.
Hamuq product context
Hamuq sells no bed risers, and here is what it sells instead
Hamuq makes bed frames at published heights, which is the fifth way in Table 2: pick the frame top you want and skip the riser. Its legged frames take risers; its Delorious has 8 in of clearance and a 13 in frame top, the Diamond, California and Curvaceous have 6 in of clearance and 14 in tops, and the Upholstered Platform has 3.75 in and a 10 in top. Its Boucle Platform, Floating Wood and storage beds should not go on risers, and the tables above say so. Every frame ships with slats inside Hamuq's 7.5 cm gap specification, free delivery in 3 to 5 business days, a 5-year limited warranty and a 120-night trial.
Hamuq Inc. sells bed frames and competes with some sellers named on this page. Every competitor figure is quoted from that seller's own page or listing on November 2, 2026.
Bed raising finder
Pick the card that sounds like you
Open your route. Every answer here is also in the tables above, so nothing depends on the card.
1 A legged frame, and I want boxes underneath
Your route: one set of 4 in risers. About $11 to $15 at Walmart Canada or $24.97 for Shepherd at Home Depot, one per leg including centre legs. Check the mattress top afterwards against the height table.
2 A dorm bed
Your route: ask, measure, one set. Confirm risers are allowed, match the cup to the leg, and use a single 4 in set, not a tall stack. Add 19 cm cases once there is 20 cm underneath.
3 Hard to stand up from the bed
Your route: raise to knee level, not past it. Aim for a mattress top of 20 to 25 in; a 3 in riser such as the Slipstick CB672 at $25.98 is often enough. BIOS Medical sells risers for exactly this at $32.99. See the bed height guide for the hip surgery figures.
4 No legs, or I want the exact height
Your route: a frame at the height you want. Hamuq's Delorious has a 13 in frame top and 8 in of clearance, $713 in queen, with a 120-night trial.
Prices and lifts are as read November 2, 2026 and change often; check the seller's page before you buy.
Supplementary Hamuq product context
Hamuq owner and product Shorts
These 6 Shorts from the Hamuq channel show owners with the Hamuq Original Hybrid, the 12.5 in mattress this guide says belongs on the main bed, not the trundle. They are context for the Hamuq side only and are not evidence for any other seller's figure.
Google-style buyer questions
Bed riser FAQs for Canadian buyers
These are the questions Canadian searchers see under this topic, answered first and short.
Raising a bed
How can I raise the height of my bed?
Quick answer: Put a riser under every leg, including centre legs, for 3 to 8 in of lift at $6.30 to $33.47 a set in Canada on November 2, 2026. Without risers, use a taller box spring on a rail frame, a thicker mattress, or a frame built at the height you want.
How do you raise a bed without risers?
Quick answer: On a rail frame, swap a low profile box spring for a 9 in one, adding 4 to 7 in. On any frame, a thicker mattress adds 2 to 4 in. On a slatted platform, a bunkie board adds 1 to 2 in. For an exact height, replace the frame: Hamuq frame tops are 10 to 14 in.
What are some cheap ways to raise my mattress?
Quick answer: Four plastic risers for $6.30 to $14.29 at Walmart Canada are the cheapest, adding 3 to 4 in. A mattress topper adds 2 to 4 in to the surface without touching the frame. Both cost under $50.
How do you raise a bed up higher DIY?
Quick answer: Cut four blocks of 4 x 4 lumber to the same height, drill a shallow recess in each the size of the leg's foot, and set one under every leg, including centre legs. Keep the lift to 4 in or less and add felt underneath on hard floors.
Buying risers
How much do bed risers cost in Canada?
Quick answer: $6.30 to $33.47 for a set at Walmart Canada, $24.97 for Shepherd risers at Home Depot, $25.98 for Slipstick caster-top risers, $29.99 for JYSK's Botulf and $32.99 for BIOS Medical's, all read November 2, 2026. Tall dorm sets run to $291.36.
Does IKEA Canada sell bed risers?
Quick answer: No. On November 2, 2026, a search for "bed risers" on IKEA Canada returned room dividers and shower riser rails, not bed risers. Canadian Tire, Walmart, Home Depot, JYSK and Dollarama are the stores Google's own suggestions pair with the search.
What are the best bed risers to buy?
Quick answer: The one that fits the leg and lifts the amount you need. A square wide-foot riser spreads load on carpet; a caster-top riser such as the Slipstick CB672 holds a wheel; a stackable set reaches 8 in but wobbles more. No listing read prints a tested weight limit, so fit matters more than the brand.
What can I use instead of bed risers?
Quick answer: Cinder blocks or cut lumber under the legs, a taller box spring, a thicker mattress, or a frame at the height you want. A storage bed replaces the reason for raising the bed in the first place.
Safety and Hamuq
Is it safe to put a bed on risers?
Quick answer: Yes, on a frame with legs, when every leg including centre legs sits fully in a riser of the same height and the lift stays at about 4 in. Beds with sideboards on the floor, floating bases, storage drawers, adjustable bases and bunks should not go on risers.
Are bed risers any good?
Quick answer: For storage under a legged bed, yes: a $11 to $25 set adds the 4 in that lets 19 cm cases slide under. For a bed with no legs they do nothing, and for height alone a mattress top above 25 in becomes a climb, so check the height math first.
How high can I safely raise a bed?
Quick answer: One riser of 3 to 4 in is the usual limit; stacked sets reaching 8 in raise the tipping risk and push the mattress top past 28 in on most frames. Keep the mattress top in the 20 to 25 in band the bed height guides recommend.
Can Hamuq bed frames go on risers?
Quick answer: The legged ones can: Delorious, Diamond, California, Curvaceous and the Upholstered Platform, lifting centre legs too. The Boucle Platform, Floating Wood, storage beds and Adjustable Bed Frame should not. Hamuq sells no risers; its frames have published tops of 10 to 14 in.
How we know this
This guide was built on November 2, 2026. Walmart Canada prices and lift figures are from its search results for "bed risers"; the marketplace pages were not opened, so where a title does not state the lift, the table says so. The Shepherd, Slipstick, JYSK Botulf, BIOS Medical and Dormco prices are from the Google Shopping listings shown to a Canadian searcher for "bed risers canada" on November 2; those pages were not read, and Home Depot and Canadian Tire refused automated reads. IKEA's "bed risers" search result and LUROY price are from IKEA Canada's own search. Frame clearances and tops are from the Hamuq bed height guide's October 23 product data and the IKEA VEVELSTAD product page; the knee-level bands are from the guides quoted in the bed height guide. No riser was load-tested, and no review counts or ratings are used.
The frame built at the height you want, and 120 nights to be sure
Hamuq's Delorious Bed Frame is $713 CAD in queen with a 13 in frame top and 8 in of clearance, slats included inside Hamuq's 7.5 cm gap specification, free delivery in 3 to 5 business days, a 5-year limited warranty and a 120-night trial with courier pickup. No risers, and no guessing where the mattress ends up.
About the authors
Jordan BedwellSupplied the Hamuq frame clearances, frame tops, prices and trial terms used in Tables 2 and 3 and the finder.
Mark Edcel LopezCaptured the Canadian listings and search questions, read the Walmart and IKEA pages, and built the tables.
Nathan NielsonChecked the height arithmetic against the Hamuq frame data. He is not designated as a product reviewer for this guide.
Reviewer safeguard: This article does not use reviewedBy markup or present anyone as a credentialed product reviewer. Hamuq Inc. sells no bed risers and competes with some sellers named here for the same bedroom, which is why every figure is quoted from the seller's own page or listing, and linked below.
Sources
- Walmart Canada, search results for bed risers: Floor Protection, Miangastore, Rbaofujie, cpengpj, TIMIFIS, Xinsrenus and Khall prices and lift figures
- IKEA Canada, search for bed risers: no bed riser product returned, November 2, 2026
- IKEA Canada, VEVELSTAD bed frame: 20 cm under the bed
- Hamuq, how high should a bed be: knee-level bands, Hamuq frame tops and clearances, and the ways to raise or lower a bed
- Hamuq, under bed storage in Canada: box heights and the 19 cm test
- Hamuq, box spring in Canada: box spring and low profile prices
- Hamuq, bunkie board in Canada: board and plywood prices
- Hamuq, Delorious Bed Frame: queen price, legged frame
- Hamuq, return policy and 120-night trial
- Google Search results, Shopping listings and People Also Ask shown to a Canadian searcher for "how to raise a bed" and "bed risers canada", November 2, 2026, used for the Shepherd, Slipstick, JYSK, BIOS Medical and Dormco prices and the questions answered on this page